Leave Your Message
XJ-D308 13S 54V 20A 30A BMS for NMC 3.7V Battery Split Port Charge 5A
Hardware BMS

XJ-D308 13S 54V 20A 30A BMS for NMC 3.7V Battery Split Port Charge 5A

This model XJ-D308 BMS, 13S 20A/30A, is designed for scooters and e-bikes. Split port, charging 5A, discharging 20A/30A (optional), with NTC, weak current cable, over-short, over-discharge, over-voltage, and over-current protection. Suitable for NMC 3.7V batteries. When the 20A discharge continues, the high temperature reaches 40℃.

  • Model XJ-D308
  • Battery Cell 13S
  • Charge Current 5A
  • Discharge Current 20A/30A
  • Cell Type NMC 3.7V Battery
  • Size 65*35*10mm
  • Feature Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Weak Current Cable, NTC, Temperature sensor function, Electrostatic protection, Dust Protection, Moisture Protection
  • Warranty 24 Months

13S 20A/30A 3.7V NMC BMS, application to electric scooters/e-bikes...

Product Name
BMS battery management system
Size
Length 65mm*Width 35mm*Thickness 10mm
Series
13S
Current
20A/30A
Voltage
48V~55V
NTC
Yes
Battery Cell Type
NMC 3.7V Battery
Function
Balance, NTC temperature sensor, same port or split port (optional)
Protection
Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Weak current cable, NTC Temperature sensor function, Electrostatic protection, Dust Protection, Moisture Protection
Warranty
24 Months

Item (the spec of 13S 20A) Min Typical Max Unit
Battery pack charging voltage 55.25 55.25 V
The withstand voltage of the charging MOS 85 V
Discharge MOS withstand voltage value 85 V
Single-cell overcharge detection voltage 4.225 4.25 4.275 V
Overcharge recovery voltage 4.1 4.15 4.2 V
Overcharge detection delay 500 1000 1500 mS
Single-section overdischarge detection voltage 2.6 2.7 2.8 V
Overdischarge recovery voltage 2.9 3 3.1 V
Over-discharge detection delay 500 1000 1500 mS
Continuous discharge current of the battery pack 20 A
Continuous charging current of the battery pack 5 A
Discharge overcurrent protection 90 100 110 A
Overcurrent protection delay 800 1000 1500 mS
Self-consumption 30 50 uA
Equilibrium current --- --- --- mA
Charging temperature protection 55±4
Discharge temperature protection 75±4.
Output short circuit/overdischarge/overcurrent protection recovery After short-circuit/overdischarge/overcurrent protection, the load is removed and it automatically recovers
Short-circuit protection delay 100 300 600 uS
Under normal working conditions, the internal resistance is B- to P- 10
Maximum temperature rise with a continuous output current of 20A 40

详情(1)-恢复的_09.gif

详情(1)-恢复的_13.gif