Leave Your Message
XJ-D307 6S-10S 20A-35A BMS Split Port NTC ON/OFF Switch BMS for E-scooters
Hardware BMS

XJ-D307 6S-10S 20A-35A BMS Split Port NTC ON/OFF Switch BMS for E-scooters

This model XJ-D307 is designed for electric scooters, and is suitable for lifePO4 and Li-ion batteries, lithium iron phosphate batteries. It supports battery packs with 6 to 10 cells, split port, charge 5A, discharge 20A-35A. With NTC, and available weak current switch. Application electric scooters and e-bikes.

  • Model XJ-D307
  • Series 6S/7S/8S/9S/10S
  • Current 20A/25A/30A/35A
  • Voltage 19V-42V
  • Cell Type NMC/LFP/Lithium
  • Function Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, NTC, Electrostatic protection, Dust Protection, Moisture Protection, Weak Current Switch
  • Warranty 24 Months
  • Board Size 65*35*12MM
  • OEM/ODM Acceptable
  • Application Electric scooters, e-bikes

XJ-D307 BMS, 6S/7S/8S/9S/10S, 20A/25A/30A/35A, split port charge 5A discharge 20A-35A. For LifePO4/Lithium-ion battery, with NTC and weak current switch, small size 65*35*12mm.

Product Name
XJ-D307 BMS battery management system
Size
Length 60mm*Width 32mm*Thickness 7.5mm
Series
10S 
Current
10A/15A/20A
Input & output
Common port or split port
Cell Type
LifePO4/NMC (Li-ion)
Function
Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, NTC Temperature sensor function, Electrostatic protection, Dust Protection, Moisture Protection
Weak Current Switch
Optional
Warranty
24 Months

Item (the spec of 10S 20A 3.7V Battery) Min Typical Max Unit
Battery pack charging voltage 42.5 42.5 V
Charging MOS withstand voltage 85 V
Discharging MOS withstand voltage 85 V
Single cell overcharge detection voltage 4.225 4.25 4.275 V
Overcharge recovery voltage 4.1 4.15 4.2 V
Overcharge detection delay 500 1000 1500 mS
Single cell over-discharge detection voltage 2.6 2.7 2.8 V
Over-discharge recovery voltage 2.9 3 3.1 V
Over-discharge detection delay 500 1000 1500 mS
Battery pack continuous discharge current 20 A
Battery pack continuous charging current 5 A
Discharge overcurrent protection 90 100 110 A
Overcurrent protection delay 800 1000 1500 mS
Self-consumption 30 50 uA
Charging protection temperature 55±4.
Discharge protection temperature 75±4
Output short circuit/over-discharge/overcurrent protection recovery Automatic recovery after removing load following short circuit/over-discharge/over-current protection
Short circuit protection delay 100 300 600 uS
Normal operating state B-to-P- internal resistance 10
Continuous 4A output current maximum temperature rise 40

D307 10S 35A BMS (2).jpgD307 10S 35A BMS (3).jpgD307 10S 35A BMS (4).jpgD307 10S 35A BMS (5).jpgD307 10S 35A BMS (6).jpg