Hardware BMS
XJ-D020 3S-24S 40A-150A BMS with Balance NTC Charge 80A Discharge 150A
3S-24S, 40A-150A, for LifePO4 and NMC battery, with balance, NTC temperature sensors
|
Product Name |
XJ-D020 BMS battery management system |
|
PCBA Size |
154*85*18MM |
|
Series |
3S-24S |
|
Current |
40A-150A |
|
Cell Type |
LifePO4/NMC/Li-ion battery |
|
Function |
Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Balance function, NTC Temperature sensor function, Electrostatic protection, Dust Protection, Moisture Protection |
|
Warranty |
24 Months |
| Item (the spec of 24S 150A) | Min | Typical | Max | Unit |
| Battery pack charging voltage | 88.8 | 90 | V | |
| The withstand voltage of the charging MOS | 150 | V | ||
| Discharge MOS withstand voltage value | 150 | V | ||
| Single-cell overcharge detection voltage | 3.7 | 3.75 | 3.8 | V |
| Overcharge recovery voltage | 3.5 | 3.55 | 3.6 | V |
| Overcharge detection delay | 500 | 1000 | 1500 | mS |
| Single-section overdischarge detection voltage | 2.1 | 2.2 | 2.3 | V |
| Overdischarge recovery voltage | 2.6 | 2.7 | 2.8 | V |
| Over-discharge detection delay | 500 | 1000 | 1500 | mS |
| Continuous discharge current of the battery pack | 150 | A | ||
| Continuous charging current of the battery pack | 80 | A | ||
| Discharge overcurrent protection | 360 | 400 | 440 | A |
| Overcurrent protection delay | 5 | 10 | 20 | mS |
| Self-consumption | 30 | 50 | uA | |
| Equilibrium current | 26 | 36 | 46 | mA |
| Charging temperature protection | /℃. | |||
| Discharge temperature protection | /℃ | |||
| Output short circuit/overdischarge/overcurrent protection recovery | After short-circuit/overdischarge/overcurrent protection, the load is removed and it automatically recovers | |||
| Short-circuit protection delay | 100 | 300 | 600 | uS |
| Under normal working conditions, the internal resistance is B- to P- | 10 | mΩ | ||
| Maximum temperature rise with a continuous output current of 150A | 40 | ℃ | ||