Leave Your Message
XJ-D010 BMS 11S 12S 13S 15A 20A Separate Port Charge 3A Discharge 15A/20A
Hardware BMS

XJ-D010 BMS 11S 12S 13S 15A 20A Separate Port Charge 3A Discharge 15A/20A

This model XJ-D010 BMS, 11S-13S, 15A/20A, is designed for scooters and e-bikes. Separate port, the charge current is 3A, and the discharge current is 15A or 20A, it depends on your need. With temperature sensors, over-short, over-discharge, over-voltage, and over-current protection. Suitable for NMC 3.7V batteries and LiFePO4 3.2V batteries. 

  • Model XJ-D010
  • Series 11S-13S
  • Current 15A/20A
  • Voltage 46V-54V
  • Cell Type NMC/LFP/Lithium
  • Function Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, NTC Temperature sensor function, Electrostatic protection, Dust Protection, Moisture Protection
  • Warranty 24 Months
  • Board Size 60*32*10.5MM
  • OEM/ODM Acceptable
  • Application Electric scooters, e-bikes...

11S-13S 15A/20A BMS, for LifePO4 NMC Lithium battery, application to electric scooters e-bikes, with NTC

Product Name
BMS battery management system
Size
Length 60mm*Width 32mm*Thickness 10.5mm
Series
11S-13S
Current
15A/20A
Voltage
46V-54V
Temperature Sensors
Yes
Battery Cell Type
NMC 3.7V Battery / LifePO4 3.2V Battery
Function
Separate port
Protection
Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Temperature sensor function, Electrostatic protection, Dust Protection, Moisture Protection
Warranty
24 Months

Item (the spec of 13S 20A) Min Typical Max Unit
Battery pack charging voltage 54.6 55.25 V
The withstand voltage of the charging MOS 85 V
Discharge MOS withstand voltage value 85 V
Single-cell overcharge detection voltage 4.2 4.25 4.3 V
Overcharge recovery voltage 4.1 4.15 4.2 V
Overcharge detection delay 500 1000 1500 mS
Single-section overdischarge detection voltage 2.6 2.7 2.8 V
Overdischarge recovery voltage 2.9 3 3.1 V
Over-discharge detection delay 500 1000 1500 mS
Continuous discharge current of the battery pack 20 A
Continuous charging current of the battery pack 5 A
Discharge overcurrent protection 55 65 75 A
Overcurrent protection delay 500 1000 1500 mS
Self-consumption 30 50 uA
Equilibrium current / / / mA
Charging temperature protection /.
Discharge temperature protection /
Output short circuit/overdischarge/overcurrent protection recovery After short-circuit/overdischarge/overcurrent protection, the load is removed and it automatically recovers
Short-circuit protection delay 100 300 600 uS
Under normal working conditions, the internal resistance is B- to P- 20
Maximum temperature rise with a continuous output current of 20A 40

D010 BMS (2).jpgD010 BMS (3).jpgD010 BMS (4).jpgD010 BMS (5).jpgD010 BMS (6).jpgD010 BMS (7).jpg