XJ-A210-B 2S 3A BMS for Lithium Battery Management System 18650 21700 BMS
2S 3A BMS for 18650 21700 Lithium Battery
|
Product Name |
2S 3A Lithium Battery Protection Board |
|
Size |
Length 35.6mm*Width 7.6mm*Thickness 0.8mm |
|
Series |
2S |
|
Current |
3A |
|
Cell Type |
LifePO4/NMC/Li-ion Battery |
|
Function |
Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Balance function, Temperature sensor function, Electrostatic protection, Dust Protection, Moisture Protection |
|
Warranty |
24 Months |
| Item | Symbol | Inspection standard | Unit | |||
| Min | Typical | Max | ||||
| Overcharge protection | Overcharge detection voltage | VDET1 | 4.225 | 4.25 | 4.275 | V |
| Overcharge detection delay time | tVDET1 | 900 | 1300 | 1700 | ms | |
| Overcharge discharge voltage | VREL1 | 4 | 4.05 | 4.1 | V | |
| Over-discharge protection | Over-discharge detection voltage | VDET2 | 2.4 | 2.5 | 2.6 | V |
| Over-discharge detection delay time | tVDET2 | 120 | 160 | 200 | ms | |
| Over-discharge discharge voltage | VREL2 | 2.9 | 3 | 3.1 | V | |
| Overcurrent protection | Overcurrent detection voltage | VDET3 | 0.18 | 0.2 | 0.22 | V |
| Overcurrent protection current | IDP | 9 | 11 | 13 | A | |
| Detection delay time | tVDET3 | 6 | 10 | 14 | ms | |
| Short-circuit protection | Detection delay time | TSHORT | 100 | 200 | 400 | μS |
| Conditions for lifting protection | Disconnect the external short-circuit load or charge and restore | |||||
| Internal resistance | Main circuit on-state resistor | RDS | 20 | 40 | mΩ | |
| Current consumption | It usually consumes current when in operation | IDD | 7 | 12 | μA | |
| Static current | It consumes current during hibernation | IPWN | 0.1 | μA | ||
















