Products

This model XJ-D494 BMS, 6S-16S 10A-60A, is designed for electric two-wheelers and three-wheelers. Separate port, the charge current is 5A, and the discharge current is 10A to 60A, it depends on your need. With balance, NTC temperature sensors, weak current switch, over-short, over-discharge, over-voltage, and over-current protection. Suitable for NMC 3.7V batteries and LiFePO4 3.2V batteries. 

17S-24 2A Inductive Active Balancing is a technology that uses the characteristics of inductance to achieve charge and voltage balance among each cell in a lithium battery pack. It uses circuits to balance the charge and voltage between cells to achieve the best performance.

This model XJ-D603 is designed for electric scooters, and is suitable for lifePO4 and Li-ion batteries, lithium iron phosphate batteries. It supports battery packs with 6 to 10 cells, working current of 10A-30A. With balance, NTC, and available weak current switch.

9S-16S 2A Inductive Active Balancing is a technology that uses the characteristics of inductance to achieve charge and voltage balance among each cell in a lithium battery pack. It uses circuits to balance the charge and voltage between cells to achieve the best performance.

5S-8S 2A Inductive Active Balancing is a technology that uses the characteristics of inductance to achieve charge and voltage balance among each cell in a lithium battery pack. It uses circuits to balance the charge and voltage between cells to achieve the best performance.

XJ-D038V5 BMS, 4S-24S 150A-300A, same port, supports LifePO4, NMC, Sodium-ion battery—this model with balance, NTC Temperature sensor, and weak current switch.

4S 2A Inductive Active Balancing is a technology that uses the characteristics of inductance to achieve charge and voltage balance among each cell in a lithium battery pack. It uses circuits to balance the charge and voltage between cells to achieve the best performance.

This device supports 4 - 25 strings of battery cells. With a maximum continuous working current of 100A/150A and a peak current reaching up to 450A, it's compatible with ternary lithium, lithium iron phosphate, and sodium ion battery packs. It's widely applied in low - speed electric vehicles, two - wheelers, three - wheelers, and forklifts. By offering enhanced protection, it improves battery safety and stability, thus extending battery life significantly.

Despite its compact size, this 1S lithium battery protection board packs a punch with its remarkable capabilities.  It's tailor-made for 18650 battery packs in a wide range of small household appliances.  This board is engineered to meticulously safeguard the battery's health.

By warding off overcharge, overdischarge, and overcurrent situations, it effectively extends the battery's lifespan.  Additionally, its short-circuit protection function is a crucial feature, ensuring that small household appliances operate stably and safely, providing users with a reliable and worry-free experience.

XJ-D598, this model is a 13S 36V 20A BMS for scooter e-bikes, applicable to LiFePO4 NMC lithium batteries, featuring balance, NTC, and temperature sensors. This model has same port and split port, according to your requirements. 

Battery Type: Cylindrical lithium battery

Rated Capacity: 3500 mAh

Standard Voltage: 3.65V

Charging Voltage: 4.2V

Operating Voltage: 2.5~5.2V

Dimensions: 18.35*65 (mm)

Application: Power Storage

Rechargeable: Yes

Material: Lithium Iron Phosphate

Storage Temperature: -20℃~45℃

Operating Temperature: -20℃~60℃

Net Weight: 48±2 (g)

Cycle Count: 800~900

Battery Type: Cylindrical lithium battery

Rated Capacity: 5000 mAh

Standard Voltage: 3.65V

Charging Voltage: 3.65V

Operating Voltage: 2.5~4.2V

Dimensions: 21.15*70.15 (mm)

Application: Portable Power Storage

Rechargeable: Yes

Material: Lithium Iron Phosphate

Storage Temperature: -20℃~45℃

Operating Temperature: -20℃~60℃

Net Weight: 69±2 (g)

Cycle Count: 1000